EKO Q offers different types of analysis listed below. The analyses provide different point of view on your data while sharing common idea and structure.
- Single Sensor Analysis. Analyze the GHI or GTI irradiance data using model correlative data such as satellite data. See details in Configure Single Sensor Analysis.
- Sensor-to-Reference Analysis. Analyze the GHI or GTI irradiance data using GHI data measured with a reliable GHI reference sensor on the same site. For this analysis you need data from two sensors configured on the site. You can also use this type of analysis with your own GHI correlative data. See details in Configure Sensor-to-Reference Analysis.
- Fleet Analysis. Analyze GHI or GTI data provided by multiple similar sensors on the site and see how they perform as a group. For this analysis you need three or more sensors on the site that measure global irradiance with the same orientation. See details in Configure Fleet Analysis.
Once the analysis is configured click Update Analysis and proceed to Analysis tab to run the analysis using Run (
) button.
Next article: See analysis report
Go back to: Sensor data configuration check