Using EKO Q is easy. When you have collected solar irradiance data in a form of tabular .csv/.txt/.dat or .xlsx file, do the following steps.
- Configure site and set up key parameters such as latitude and longitude coordinates.
- Configure irradiance sensor and provide its key details such as sensor model and orientation.
- Upload the data file. Use embedded data onboarding tool if case of custom file formats.
- Look at the data. Use embedded visualization capabilities to quickly check for any easy-to-see issues.
- Configure and run analysis. Use one of the available analysis options.
- Download the Analysis Report once the analysis is done, with key insights on your data and automated recommendations based on them.